UVNU 10 SZ-IP-COMBI WITH LIGHT AND AUDIBLE INDICATION

COMBI high voltage detector with light and sound indication combines two modes- contact and non-contact – to determine voltage presence or absence in AC electrical installations with commercial frequency of 10kV nominal voltage. The detector consists of a handle, insulating part and working part, combined with the indicating part. The insulating part has an inbuilt device for non-contact voltage detection and its power switch. The non-contact part indicates the presence of voltage by light signal (bright red LED) and sound (1-2Hz). Voltage detection at contact part is indicated by two light emitting diodes and the sound signal has a 4-5 Hz frequency. The device has a self-test system and a possibility for switching the non-contact part on and off. At voltage absence, the detector switches to power saving mode in 30 seconds.
With the help of a unified adapter, the working part of the indicator may be used in combination with SHIUK rods or other multi purpose rods with М14 thread adapters. UVNU-10 SZ IP COMBY-K detector is fitted with an additional light-emitting diode for monitoring the status of power source.

  • Nominal Voltage, kV from 6 to 10
  • Detector Ignition Voltage, kV 1,5
  • Frequency, Hz 50(60)
  • Minimal distance for triggering of non-contact part, m 1
  • Power supply, V 6, (2 x R2450)
  • Audible Signal Level, dBA 70
  • Handle length, mm 120
  • Insulating part length, mm 340
  • Total length, mm 860
  • Overall dimensions, mm: 860х80х110
  • Detector 765х110х80
  • Working part 200х80х60
  • Weight, kg 0,7
  • Temperature оC from - 30 up to + 55
  • Humidity %, at 25 оC 98